Kontron Isocratic system
The 420 pump is a very strong and reliable 2-pistons pump. This pump is fitted with new check valve cartridges and piston seals, and has been thoroughly checked over. It has a solvent bottle try fixed to the top (this has some spillage damage to the paint inside) but provides a safe and tidy storage for solvent bottles.
The model 432 detector is very sensitive, and was for years the flagship detector for Kontron. This unit will be fitted with a new lamp. A manual valve or autosampler, and a data system will be required to use this system, and these are available.
£1495.00 (+VAT)
For UK installation add £150 to cover bottles, tubing, sinters etc
To use this system, an injection valve or autosampler and data system would be required:
Injector options:
Used Rheodyne 7125 £100.00 A good valve but has no contact closure to start a data system.
A new Rheodyne 7725 £795.00 An outstanding valve, with built in contact closure, Make Before Break technology, and several other benefits.
A new Ecosystem valve. £495.00 Less expensive, has the contact closure, but not MBB.
A fixed volume autosampler. Injects the loop volume each time. Very precise and reproducible.
A variable volume autosampler. Can inject variable volumes, but less precise.
Data System Options:
Clarity Data System, for 1 HPLC with 1 detector. £3295.00 inc computer and UK installation. Can be upgraded for up to four HPLC's with up to 10 data channels each. Can also control some autosamplers, pumps and detectors.
Clarity Lite Data System. £2295 inc computer and installation. As above but with a few restrictions. Can also be upgraded, but the upgrade cost is higher.
|